The use of conveyor belt glue is as follows:
1. Surface treatment: First of all, it is necessary to polish the bonding surface of the conveyor belt to remove the dirt and oxide layer on the surface to increase the adhesion of the glue. Then, wipe the adhesive surface with detergent to ensure that the surface is clean and free of oil.
2. Mixed glue: Conveyor belt glue is generally divided into two groups, adhesive and curing agent, the two groups of glue need to be mixed evenly according to a certain proportion. In the mixing process, pay attention to the mixing speed and time to ensure that the glue is fully mixed.
3. Paint glue: evenly paint the mixed glue on the adhesive surface of the conveyor belt, paying attention to thin and uniform brushing to avoid missing coating or uneven thickness. Pay attention to the amount of glue used when brushing, too much or too little will affect the bonding effect.
4. Bonding bonding: After brushing the glue, the bonding surface of the conveyor belt should be bonded together as soon as possible, and a certain pressure should be applied to make the bonding surface close contact. During the fitting process, care should be taken to align the center line of the conveyor belt to avoid deviation.
5. Curing treatment: After the conveyor belt is bonded, it needs to be cured. Curing time depends on the type of glue and the ambient temperature, generally takes a few hours to a few days. In the curing process, it is necessary to avoid the interference of external forces on the conveyor belt, so as not to affect the bonding effect.
6. Inspection and acceptance: After the conveyor belt is cured, it is necessary to check and accept the bonding part to ensure that the bonding is firm, no bubbles, no cracks and other defects. If the problem is found, it should be repaired or re-bonded in time.
When using conveyor belt glue, you also need to pay attention to the following points:
1. Selection of glue: The appropriate glue should be selected according to the material and use environment of the conveyor belt to ensure the bonding effect and service life.
2. Construction environment: The construction environment should be kept dry and clean to avoid the impact of impurities such as dust and oil on the bonding effect.
3. Operation specifications: During the construction process, the operation specifications should be strictly followed to avoid bonding failure caused by wrong operations.
4. Safety protection: glue generally has a certain irritation and toxicity, in the use process should pay attention to safety protection, avoid contact with the skin and eyes.
In short, the use of conveyor belt glue needs to be selected and adjusted according to the specific situation to ensure the bonding effect and service life. In the process of use, attention should be paid to safety protection to avoid accidents.
){kind=link}
){kind=link}